Measures from the outside – nothing on the inside, now also with Bluetooth

For water, waste, fuel, oil and all other fluids

Gobius Pro sensors measure the fluid level in virtually all kinds of tanks—from the outside! The sensor can work alone as a level switch or with up to nine other sensors. With Bluetooth communication, you can monitor the tank directly on your smartphone. You do all setups with your smartphone. And you are ready to go in 15 minutes with our easy install guarantee. Support 12-24 Volts.

Read more and watch the movies
Download our data sheet with all technical specifications

 

 

Gobius Tank Monitors and Gobius Level Switches share common features including that they are easy to install and work equally well on both metal and plastic tanks. Regardless of tank size, shape, or any liquid- containing tank, Gobius always measures with accuracy.

Thanks to the measurements from the outside of the tank, you do not have to remove it to make holes in your tank. Many other products on the market today have gauges which have sensors that go inside your waste tank and this can often lead to problems. With Gobius, there is no risk of leakage. The Gobius system is delivered as a complete system including display, sensors, cables, control unit and instructions – all in English.

 

       

General information

General information

  • Very easy and quick to install
  • All settings are done automatically
  • No need for removing the tank
  • No drilling of holes in the tank
  • No cleaning inside the tank
  • No maintenance

For all these tank materials

For all these tank materials

  • Stainless steel, 1-3 mm
  • Steel, 1-3 mm
  • Aluminium, 2-5 mm
  • Polyethene, 2-12 mm
  • Fibre Glass, 4-8 mm

Technical information

Tecnical information

  • Coloured LED show lamps the levels
  • Extremely low electricity consumption, < 40 mA
  • Support 12-24 Volts
  • Easy to connect to analouge gauges from Wema, Faria, VDO…
  • Supports 10-190 Ohm, 240-33 Ohm, 4-20 mA and 0-5 Volt
  • By using an adapter also supporting NMEA 2000
  • Easy to integrate with EmpirBus NXT
  • Can also be integrated with Ontech GSM module to get alarm on your mobile phone
  • Extra alarm signal when the tank is empty and full

Sizes

Sizes

  • Panel (display), 60 x 60 x 4 mm
  • Control Unit, 160 x 130 x 26 mm
  • Sensor, 70 mm diameter, 27 mm height
  • Panel cable, 1,5 m (std), 10 m options, see our webshop
  • DC cable, 1,8 mm
  • Sensor cable, 1,0 m (std), 10 m options, see our webshop
  • Analog cable, 0,5 m
  • Sensor tape, 3M 4632, 45 mm diameter

Testimonials

Lars (Östersund, SE)

Testimonials

John (DABEE, AU)

Testimonials

John (DABEE, AU)

Read more